home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir30
/
pcdcad.zip
/
VENDINFO.DIZ
< prev
next >
Wrap
VENDINFO
|
1994-03-31
|
12KB
|
257 lines
┌────────────────────────────────────────────────────────────────────┐
│ PC-Draft-CAD Computer Aided Drafting v3.06 │
│ SEE BELOW FOR PRODUCT INFORMATION │
└────────────────────────────────────────────────────────────────────┘
┌────────────────────────────────────────────────────────────────────┐
│ This is a VENDINFO Product Information Record │
│ │
│ This record is a means of conveying information about a software │
│ product from the author to distributors and users. It contains a │
│ normal, "human-readable" section (you're reading it now), followed │
│ by a compressed data record. The data record contains a great │
│ deal of information in a form useable by automated tools. This │
│ allows BBSes, disk vendors, etc. to test automatically for │
│ permission to distribute, and to automatically extract product │
│ information for use in BBS files databases, vendor catalogs, etc. │
│ │
│ The VENDINFO file standard is published and is freely useable. │
│ │
│ The VENDINFO toolset includes a free end-user viewer, processing │
│ tools for use by distributors (BBSes, shareware disk vendors, │
│ etc.), and the editor used by author/publishers to produce these │
│ records. These tools are either free or very-low cost shareware. │
│ The toolset can be obtained from many sources, including the │
│ originators of VENDINFO: │
│ │
│ Rams' Island Software Voice: 303-841-2848 CompuServe: 76244,324 │
│ 7644 E. Lakecliff Way BBS: 303-841-6269 FidoNet: 1:104/333 │
│ Parker, CO 80134-5904 USA RIME: RAMSISLE │
└────────────────────────────────────────────────────────────────────┘
VENDINFO standard v1.00, produced by VendEdit v1.00, 2-Apr-1994
===== Product Information ==============================
Product: PC-Draft-CAD Computer Aided Drafting
Version: 3.06
Version Date: 31-Mar-1994
Product Type: Software
Basic Distribution Policy (see License, below, for details):
Shareware, subject to distribution restrictions
Product Description: PC-Draft-CAD 3.06h Full CAD system!!! Full
featured vector based CAD with many features
found only in expensive commercial programs.
Prints on dot-matrix, Laser & plotters. Uses
EMS,XMS, and virtual memory. Symbol
Libraries. Fonts. Unlimited Layers. Area
calculation. Spline curves. Macros. CGA, EGA,
VGA, Herc. ASP Shareware, $65
Category: CAD/CAM applications
Keywords: CAD GRAPHICS DRAW SCALE PLOTTERS HOUSE PLAN
Required Packages: PCDCAD
This Package: PCDCAD
Required Configuration
Processor Family: Intel 80x86 (minimum 8086/8088)
Minimum OS: MS-DOS 3.0
Standard RAM: 384K
Hard Drive Space: 800K
Won't Work With:
Monochrome Display Adapter (MDA)
Orders:
Address: Natural Software
19 South Fifth Street
St. Charles, IL 60174
Phone: 708-377-7320
CompuServe: 70047,744
Internet: 70047.744@compuserve.com
Support:
Address: Natural Software
19 South Fifth Street
St. Charles, IL 60174
Phone: 708-377-7320
CompuServe: 70047,744
Internet: 70047.744@compuserve.com
===== Information for Users ("READ-ME") ================
This package contains PC-Draft-CAD from Natural Software. It's a
commercial quality Computer Aided Design and Drafting program that lets
you draw and print exact scale drawings. This document contains only a
brief description of the package and its features, along with
instructions for its installation. The package includes detailed
documentation, but it is in archived form,and is more easily read after
installation.
PC-Draft-CAD is a shareware program. This evaluation version includes
all features of the program, and is not crippled in any way. You may
use it for up to 30 days, without charge (see DRAFT3.DOC for more
details). If you like the program, and wish to continue its use after
this evaluation period, you are required to pay for the program (see
ORDER.FRM for more details). Any fee you may have paid to others (disk
vendors, dealers, etc.) to obtain this evaluation version was a fee for
their copying and distribution services, rather than a payment for
continued use of the program.
===== Packing List =====================================
As released by the author or publisher, this package contained the
following files in addition to this VENDINFO.DIZ:
Filename Size Date Time CRC32
READ_ME.1ST 216 31-Mar-1994 03:06a EB5EF01B
BBSINST.BAT 3563 31-Mar-1994 03:06a 76D6DC54
INSTALL.BAT 3850 31-Mar-1994 03:06a 21A649D9
READ_ME.BAT 418 31-Mar-1994 03:06a 3EA69FCC
FILE_ID.DIZ 346 31-Mar-1994 03:06a 458B0734
VENDOR.DOC 216 31-Mar-1994 03:06a 8C5E6214
PCDCAD1.EXE 149305 31-Mar-1994 03:06a B16DD9A5
PCDCAD2.EXE 126952 31-Mar-1994 03:06a 87AD5C9F
PCDCAD3.EXE 67305 31-Mar-1994 03:06a 75206B7B
ORDER.FRM 2731 31-Mar-1994 03:06a 9ED3ED31
READ.ME 4011 31-Mar-1994 03:06a 036E292D
DESC.SDI 38 31-Mar-1994 03:06a 81B51D1B
===== Installation =====================================
- if you received this shareware version on diskette, there should be
three EXE files: PCDCAD1.EXE PCDCAD2.EXE and PCDCAD3.EXE:
To install on your hard disk (C:)
1 - Place this disk in drive A:
2 - Enter: [C:] to make it your current drive.
3 - Enter: [A:INSTALL].
To install on a two floppy system, you must have
THREE formatted (empty) disks
1 - Place this disk in drive A:
2 - Place a blank disk in drive B:
3 - Enter: [B:] to make B: your current drive.
4 - Enter: [A:PCDCAD1].
5 - After all files have been extracted from PCDCAD1,
6 - Place a new blank disk in drive B:
7 - repeast steps 4, 5 and 6 for PCDCAD2 and PCDCAD3.
- if you received this from a BBS you obviously have already extracted
the files (or you wouldn't be reading this!). To select the correct
display driver and to set up your sub-directories, run: BBSINST.BAT.
How to install under Windows:
-----------------------------
To setup PC-Draft-CAD to run under Windows:
In program manager:
1. Open the group icon where you want to put the PC-Draft-CAD icon.
2. Click on the File menu and choose New. The "New Program Object"
dialog box displays.
3. "Program Item" is already selected, so simply click on the OK
button.
4. The "Program Item Properties" dialog box appears. Enter the
following data:
Description: PC-Draft
Command Line: C:\PCDCAD\DRAFT3.PIF
Working Directory: C:\PCDCAD
Shortcut Key: None
5. Click on the Change Icon button. A warning box says: "There are no
Icons available....". Click the OK button.
6. In the "Change Icon" dialog box, enter a new File Name:
C:\PCDCAD\DRAFT3.ICO
7. Click on the OK button. It displays the Draft3 icon. Click on the
OK button again to exit back to the "Program Item Properties"
dialog.
8. Click on the OK button to exit. The Draft3 Icon should appear among
the others in your active group.
9 Double click on the Draft3 icon to start the CAD program.
System Requirements:
256k, MS-DOS 3.0 or later. CGA, EGA, VGA or Hercules Graphics Display.
Supported printers: IBM and Epson dot-matrix, 24pin dot-matrix, HP
LaserJet+, IIP, III, and HP DeskJet and plotters compatible with the
HPGL plotter language. Mouse is sup-ported but not required. XMS and EMS
are supported but not required. Math co-processor is used if installed
but not required.
BBS vendors: Post either the one PCDCAD.ZIP, or unzip and post the
three LHA files.
DISK vendors: Unzip PCDCAD.ZIP to a single floppy disk for distribution.
===== Warranty =========================================
WARRANTY
THIS SOFTWARE WILL PERFORM AS DESCRIBED HEREIN ONLY IF PROPERLY APPLIED.
OUR LIABILITY TO YOU IS LIMITED TO REPLACING THE SOFTWARE (FOR
REGISTERED USERS ONLY). WE HAVE NO LIABILITY TO YOU FOR ANY DAMAGE OR
LOSS, INCLUDING SPECIAL, INCIDENTAL, OR CONSEQUENTIAL, CAUSED BY THIS
SOFTWARE, DIRECTLY OR INDIRECTLY.
YOU AGREE TO THE TERMS OF THIS LICENSE BY YOUR DECISION TO USE THIS
SOFTWARE.
===== License for Use and Distribution =================
THE PC-Draft-CAD SOFTWARE AND MANUAL ARE COPYRIGHTED, ALL RIGHTS ARE
RESERVED. (when you register) YOU HAVE PURCHASED A LICENSE TO USE THIS
SOFTWARE ON ONE MACHINE AT A TIME. YOU ARE AUTHORIZED TO MAKE COPIES OF
PC-DRAFT-CAD FOR THE SOLE PURPOSE OF BACKING UP YOUR SOFTWARE AND
PROTECTING YOUR INVESTMENT FROM LOSS.
Note: this copy of PC-Draft-CAD is being distributed as Shareware. This
means that you may copy the disk just as you received it and you may
give it to others for their trial use. You are also permitted and
encouraged to upload this version to electronic bulletin board services.
You may not, however resell or collect any fee for the distribution of
PC-Draft except as specified in this VENDINFO.DIZ file or with the
permission of Natural Software. (This does not include the normal fees
for using bulletin boards.) If you continue to use PC-Draft-CAD after
your trial use, you must pay the purchase price as detailed below.
===== Compressed Data Record Follows ===================
PK